FAG 61948-C3 Single Row Ball Bearings

b1:mm; b:mm; E:mm; rs (min):2.1 mm; d2:70 mm; r1s (min):2.1 mm; Static (Coa):310 kN; F:89 mm; s:4.1 mm; Dynamic (Ca):282 kN;

B:42.00 mm; Oil Speed Rating Open/Shielded n2:3900 rpm; Basic Dynamic Radial Load Rating C:147000 N; D:180.0000 mm; Grease Speed Rating Open/Shielded n1:3200 rpm; Fillet Radius ra:2.50 mm; d:70.000 mm; Basic Static Radial Load Rating Co:140000 N; Accessories:Two Shields;

Basic static load rating C0:4250 kN; B5:50 mm; B1:195 mm; b:16.7 mm; db min.:296 mm; D1 ≈:417 mm; B:146 mm; K:9 mm; ra max.:4 mm; d3:330 mm;

Basic Static Radial Load Rating Co:110000 N; Oil Speed Rating n2:6300 rpm; Basic Dynamic Radial Load Rating C:138000 N; B:58.00 mm; Grease Speed Rating n1:3800 rpm; Fillet Radius ra:2.00 mm; Fillet Radius rb:1.00 mm; d:45.000 mm; D:120.0000 mm;

C:17.5 mm; Db min.:97 mm; Calculation factor e:0.46; Reference speed:5000 r/min; Limiting speed:6000 r/min; r3,4 min.:1.5 mm; Calculation factor Y:1.3; d:65 mm; d1 ≈:83.3 mm; Cb min.:5.5 mm;

D:40 mm; Grease:5 000 min-1; d1:40 mm; dynamic Cr:24.530 kN; Oil:6 700 min-1; static Cor:37.700 kN; d:20 mm; H:14 mm; rs (min):0.6 mm; D1:22 mm;

Fillet Radius rb:1.00 mm; D:300.0000 mm; Basic Static Radial Load Rating Co:735000 N; Fillet Radius ra:3.00 mm; Grease Speed Rating n1:1800 rpm; Basic Dynamic Radial Load Rating C:507000 N; B:124.00 mm; d:140.000 mm; Oil Speed Rating n2:2200 rpm;

ra max.:4 mm; Da max.:303.5 mm; Fatigue load limit Pu:208 kN; D:320 mm; Reference speed:1300 r/min; Calculation factor Y0:1.8; Limiting speed:2000 r/min; b:19 mm; da max.:189 mm; r3,4 min.:4 mm;

rs (min):2.1 mm; D:170 mm; d:80 mm; Oil:46.600 kN; B:58 mm; with tapered bore:2 800 min-1; with cylindrical bore:2 200 min-1; Static (Cor):8.3 mm; Dynamic (Cr):4.5 mm; Pu:349 kN;

Taconite seal:TER 52; P120°:31.6 kN; Cap bolt:2 x 5/8-11 UNC; R2:22.225 mm; Appropriate attachment bolt size G:0.625 in; Adapter sleeve assembly:SNW 17x2.7/8; J max.:279.4 mm; H2:38.1 mm; Max. speed for Taconite seal:1050 r/min; Stabilizing ring:SR-17-14;

d1:190 mm; r1,2 min.:2.1 mm; Calculation factor Y2:4.2; ra max.:2 mm; B:82 mm; D:310 mm; B1:102 mm; da min.:207 mm; K:7.5 mm; B2 ≈:108 mm;

RG:3/4 NPT; Da:259.999 mm; R1:87.313 mm; R2:38.1 mm; ba:64.294 mm; Initial grease fill:481.95 g; Bearing:23034 CCK/W33; Eye bolt:2 x 3/8-16 UNC; P90°:180 kN; End plug (suffix Y):EPR 18;

Mass bearing:26 kg; D:220 mm; Maximum dynamic radial loads Fr max.:440 kN; d1 ≈:119 mm; b:10.2 mm; K:6; d:90 mm; Fatigue load limit Pu:78 kN; Basic dynamic load rating C:484 kN; C:119 mm;

Basic Dynamic Radial Load Rating C:68900 N; d:70.000 mm; Oil Speed Rating n2:5600 rpm; B:24.00 mm; Basic Static Radial Load Rating Co:56000 N; Grease Speed Rating n1:4300 rpm; Fillet Radius ra:1.50 mm; D:125.0000 mm;

b:mm; b1:mm; d2:360 mm; r1s (min):6 mm; d2 (max):mm; Dynamic (Ca):1076 kN; F:480 mm; rs (min):6 mm; E:mm; B:82 mm;